User Manual

Commissioning
Part No.: 4417.762_Rev07 SmartRadar FlexLine
Service Manual 6 - 55
6.4.5.2.8 Supported Units
The SmartRadar Flexline supports the following units:
6.4.6 Commissioning the HCI-1WL Configurable Transducer Blocks
The configuration of the configurable transducer blocks can not entirely
be done via Wireless Builder. To configure the configurable transducer
blocks, the following entities must be set by using Engauge.
NOTE: These settings are only available for Engauge
Professional users.
Parameter Supported Units
Level and position Meters (m)
Millimeters (mm)
Inches (in)
Feet (ft)
Level rate of change Millimeters / second (mm/s)
Meters / hour (m/h)
Inch / minute (in/min)
Feet / minute (ft / minute)
Temperature Degrees Celsius (ºC)
Degrees Fahrenheit (ºF)
Pressure Pascal (Pa)
kilo Pascal (kPa)
bar
psi
Density kg / m
3
kg / l
g / ml
lbs / ft
3
deg API