User Manual

Commissioning
SmartRadar FlexLine Part No.: 4417.762_Rev07
6 - 52 Service Manual
Units Index In this field you can select the required engineering unit from the list of available units.
(level units for the level TB, and temperature units for the temperature TB).
Note: For supported units, see 6.4.5.2.8.
Decimal Not used in the SmartRadar FlexLine
Average Ambient temperature This is the average ambient temperature
Lowest element offset Offset of lowest temperature element relative to the bottom of the tank
Element position 1...8 Position of the temperature elements 1...8
Element position 9...16 Position of the temperature elements 9...16
EU at 100% (level scale) Not used in the SmartRadar FlexLine
EU at 0% Not used in the SmartRadar FlexLine
Units Index In this field you can select the required engineering unit from the list of available units.
(level units for the level TB, and temperature units for the temperature TB).
Note: For supported units, see 6.4.5.2.8.
Decimal Not used in the SmartRadar FlexLine
Element temperature 1...8 Temperature of element 1...8
Element temperature 9...16 Temperature of element 9...16
Element temperature status
1...8
Status of element temperature 1...8
Element temperature status
9...16
Status of element temperature 9...16
Number of elements Number of installed temperature elements
MRT or RTD element type Type of installed temperature element
TPL = MTT Honeywell Enraf
QSA = MRT Sangamo
SPL = Spot PT100 Large
SPS = Spot PT100 Small
SNI = Spot Ni191
SSS = Spot Sangamo CU90
SCB = Spot Beacon CU90
SCN = Spot CU90 Nulectohm
Parameter Description