User Manual

Commissioning
SmartRadar FlexLine Part No.: 4417.762_Rev07
6 - 50 Service Manual
6.4.5.2.6 Temperature Details Transducer Block Settings
The Temperature Details transducer block is an additional temperature
transducer block that can be used if details of individual temperature
elements (for example, to make a temperature profile) are relevant.
Just like the Average product temperature transducer block, it publishes
the average product temperature as PV and the Vapour Temperature as
SV.
The additional parameters can be used via Wireless Builder or the OPC
server.
NOTE: This Transducer block is not necessary when making
temperature profiles via a tool that uses GPU
communication.
- Units Index In this field you can select the required engineering unit from the list of available units.
(level units for the level TB, and temperature units for the temperature TB).
Note: See also limitations described before.
Note: For supported units, see 6.4.5.2.8.
- Decimal Not used in the SmartRadar FlexLine
Parameter Description