User Manual

Commissioning
SmartRadar FlexLine Part No.: 4417.762_Rev07
6 - 46 Service Manual
6.4.5.2.4.5 Other Tab (1)
Via this tab, an alarm test can be initiated.
Parameter Description
Alarm Test By selecting an alarm level to test - High high, High, Low, or Low low - and pressing
OK, the SmartRadar will perform an Alarm test command.
For detail settings, see 6.4.5.2.4.6.
Alarm Hysteresis This is the alarm hysteresis setting.
For detail settings, see 6.4.5.2.4.6.