User's Manual

Introduction - What is new in this controlled release
Wireless Field Interface Part No.: Rev01
1 - 2 User’s Manual
1.5 What is new in this controlled release
This release supports the following enhancements in Wireless Field
Interface field devices.
 Provides the ability to configure the publishing rate of the transducer
blocks.
 Provides the ability to support deployment of the security keys to the
Wireless Field Interface field devices, using over-the-air provisioning.
 Provides the ability to upgrade the Application Firmware on the CAN-
1WL board using the over-the-air firmware upgrade feature.
 Provides the ability to support GPU and FlexConn protocol tunnel
support with Engauge service tool.
 Supports Honeywell Enraf 854 ATG servo gauge for reading level of
the process value.
1.6 Overview of Wireless Field Interface field devices
The Wireless Field Interface is a box that can be installed next to an
installed Servo/Radar gauge. The Wireless Field Interface retrieves
information from this gauge and sends it wirelessly to the supervisory
level.