User's Manual

Firmware Upgrade - Upgrading the Wireless Field Interface device
Part No.: Rev01 Wireless Field Interface
User’s Manual 3 - 7
The FlexConn Firmware Update — Engauge dialog box appears.
4. Depending on the firmware type, the available upgrade files appear
by default. Select the required file from the list of upgrade files.
If the file is not available in the list, perform the following steps.
a)
Click Browse to browse to the directory location of the firmware upgrade
file.
b) Click Open.
5. Click Start.
The upgrade status is displayed in the status bar.
6. Close the FlexConn Firmware Update — Engauge dialog box.
7. Enter the Time Out value in the Engauge tool as 9999 ms.