User's Manual

Firmware Upgrade - Upgrading the FDAP/access point firmware
Part No.: Rev01 Wireless Field Interface
User’s Manual 3 - 5
To upgrade the FDAP/access point firmware
1. On the Selection Panel, select the FDAP/access point.
You can select multiple devices using the Selection Panel or the map
view. Use SHIFT+click to select multiple items in a successive list.
Use CTRL+click to select multiple items not in succession.
2. On the ribbon bar, in the Upgrade group, click Radio. The Radio
Firmware Upgrade dialog box appears.
3. In the Available Firmware Files list, select the required firmware
upgrade file.
By default, the firmware upgrade file appears in the list. If the file is
not available in the list, perform the following steps to open the
firmware file.
a)
Click Add to browse to the directory location of the firmware upgrade file.
b) Click Open.
4. Click Upgrade.
The Firmware Upgrade Status dialog box appears. The Progress
column displays the progress of the upgrade.
NOTE: • To abort any firmware upgrade operation, click the
Abort Upgrade icon adjacent to the upgrade
status.
• To remove the devices for which the firmware
upgrade has been completed, click the Clear
Upgrade icon adjacent to the upgrade status.
5. Close the Firmware Upgrade Status dialog box.