User's Manual

Firmware Upgrade - Verifying the WDM firmware revision
Wireless Field Interface Part No.: Rev01
3 - 2 User’s Manual
The WDM Update dialog box displays the upload status. Once
complete, the Firmware File box displays the uploaded firmware file
4. Click Update.
The firmware upgrade starts and once complete, the user interface displays
a message indicating the result of firmware upgrade operation.
WARNING! At times, the update may take longer than expected
and the result of the upgrade may not be displayed.
Instead, a “Page not available” error may appear. In
such cases, wait for a minute and then redirect the
browser to “https:// <ipaddress>/restartzfs.html” for
viewing the result. Do not remove or reboot the WDM
during the upgrade process. After the WDM upgrade
from R210 to R220 is complete, the WDM reboots
automatically.
5. Close and restart the web browser.
6. Log on to the user interface again.
7. Verify the upgraded version of the WDM firmware as follows:
a) On the Selection Panel, select the WDM.
b) On the Property Panel, expand Device Manager Summary.
c) Under Identification, verify the Revision.
3.2 Verifying the WDM firmware revision
To verify the WDM firmware revision
1. On the Selection Panel of the OneWireless user interface, select the
WDM.
2. On the Property Panel, expand Device Manager Summary.
3. Under Identification group, review the firmware version displayed in
the Revision field.