User's Manual

Configuration - Configuring the protocol tunneling
Wireless Field Interface Part No.: Rev01
2 - 26 User’s Manual
2.3.3.2 Assign IP address to the Lantronix device
Perform the following steps to assign or reassign an IP address to the
Lantronix device.
To assign or reassign an IP address to the Lantronix device
1.
From the Start menu, open Lantronix DeviceInstaller.
2. Click Device > Assign IP Address.
3. When prompted for device identification, enter the MAC address of the
Lantronix device and click Next. The MAC address is located on a sticker
on the side of the device.
4. When prompted for the assignment method, choose Assign a specific IP
address to assign a static IP address to the Lantronix device and click
Next.
5. Enter the IP address, subnet mask, and default gateway for the Lantronix
device and click Next.
6. Click Assign.
The device now uses the new IP address and has network access.