User's Manual

Introduction - About this guide
Part No.: Rev01 Wireless Field Interface
User’s Manual 1 - 1
CHAPTER 1 INTRODUCTION
The following topics describe what is new in the controlled release and
the overview of the Wireless Field Interface device.
1.1 About this guide
This document describes how to provision, configure, operate, and
monitor an ISA100 wireless interface network using the Wireless Field
Interface devices. This guide assists you in understanding, and
planning the standalone OneWireless Network.
1.2 Intended audience
This guide is intended for Service Engineers, Operators, and
Technicians who are responsible for planning, configuring,
administering, and operating the Wireless Field Interface devices using
the OneWireless Network.
1.3 Prerequisite skills
It is assumed that you are familiar with the operation of the OneWireless
Network.
1.4 Required Honeywell documentation
The following documents and sources contain additional information
required for deploying OneWirelessNetwork. It is recommended to have
these documents readily available for reference.
You can download Honeywell documentation from
http://www.honeywellprocess.com.
You can download Honeywell ENRAF documentation from
http://www.honeywellenraf.com.
Document Description
ISA100 SmartRadar FlexLine User’s Guide
This document provides the information
about provisioning, configuring, operating,
and monitoring an ISA100 wireless field
device network using the SmartRadar
FlexLine field devices.
OneWireless Wireless Device Manager
User's Guide
This document describes the procedures
to provision, configure, operate, and
monitor an ISA100 Wireless wireless field
device network using the Wireless Device
Manager.
Ensite Pro Configuration Tool
This document describes how to work with
the configuration tool Ensite Pro.