User's Manual

Configuration - Configuring the protocol tunneling
Wireless Field Interface Part No.: Rev01
2 - 22 User’s Manual
2.3.1 Configure Wireless Field Interface device interface
To configure Interface Summary and Interface Object Parameters
1.
On the Selection Panel, select the field device.
2. On the Property Panel, expand Interface Summary and Interface Object
Parameters.
3. Under Interface Summary, enter the following read/write parameter details.
a) Name — Type the required name for the channel.
b) Description — Type the required description for the channel.
4. Under Interface Object Parameters, enter the following details.
a) Flexconn Instrument Address — Enter the address of the instrument
for FlexConn messages.
WARNING! Each instrument must have a unique FlexConn
address
b) GPU Instrument Address — Enter the address of the instrument for
GPU messages .
WARNING!
Each instrument must have a unique GPU address.
c) CIU Address Emulation — Select Enabled or Disabled from the drop-
down list.
d) CIU Instrument Address — Enter the CIU instrument address.
2.3.2 Configure ENRAF serial interface
To access the field device data, you need to configure the Enraf
interface from the OneWireless user interface.
Prerequisites
Ensure the following:
 The Wireless Field Interface devices are connected to the WDM
using a serial cable.
 The Wireless Field Interface devices are joined in the ISA100
Wireless network.