User's Manual
Table Of Contents
- CHAPTER 1 Introduction
- CHAPTER 2 Configuration
- 2.1 Configuring OneWireless infrastructure
- 2.2 Configuring Wireless Field Interface device
- 2.3 Configuring the protocol tunneling
- CHAPTER 3 Firmware Upgrade
- CHAPTER 4 Operations
Configuration - Configuring Wireless Field Interface device
Wireless Field Interface Part No.: Rev01
2 - 20 User’s Manual
To configure publication rate and stale limit
1.
On the Selection Panel, select the field device.
2. On the Property Panel, expand Input Publication.
3. In the Rate field, select the publication rate, as appropriate.
4. In the Stale Limit field, select the stale limit, as appropriate.
5. Click Apply.