User's Manual

Configuration - Configuring Wireless Field Interface device
Wireless Field Interface Part No.: Rev01
2 - 18 User’s Manual
4. Under the Ethernet/UDP Interface Options, the UDP port number of the
port on which the WDM is connected is displayed.
5. Click Apply.
2.2.4.2 Monitor performance of ENRAF interface
To monitor performance of ENRAF interface
1.
On the Selection Panel, select the ENRAF interface.
2. On the Property Panel, expand Statistics.
3. Verify the following attributes to monitor the performance of the ENRAF
interface.
Message Rate: Number of messages processed by the interface, per
second.
Message Rate Max: Maximum number of messages processed by
the interface, per second.
4. Click Reset Statistics to reset all the ENRAF interface statistics.
2.2.5 Configuring field devices
2.2.5.1 Configure field device properties
To configure tag name and description
1.
On the Selection Panel, select the field device.
2. On the Property Panel, expand Field Device Summary.
3. Type the required Tag Name.
NOTE: You can change the Tag Name by double-clicking the
field device name in the Selection Panel.
4. Type the required Description.
5. Click Apply.
2.2.5.2 Configure publication rate
The publication data for input and output field devices can be configured
using the Input Publication panel in the Property Panel. Depending on