User's Manual

Configuration - Configuring Wireless Field Interface device
Part No.: Rev01 Wireless Field Interface
User’s Manual 2 - 17
2.2.4 Activating Wireless Field Interface device in OneWireless Network
The ISA100 Wireless field devices maintain a database of process
configuration, identification, and diagnostic information in memory.
WDM allows accessing this information from the Wireless Field
Interface client applications (CIU Prime hardware or Engauge
software). This enables monitoring the ISA100 Wireless field devices
like any other field device.
OneWireless Network uses serial communication interface to support data transmission
between the applications and the WDM. It also uses Ethernet/UDP interface for data
transmission.
2.2.4.1 Activate ENRAF Ethernet UDP interface on the OneWireless user interface
To activate ENRAF Ethernet/UDP interface on the OneWireless user
interface
1.
On the Selection Panel, expand the WDM icon and select ENRAF.
2. On the Property Panel, expand Configuration panel.
3. In the Interface list, click Ethernet/UDP Interface.