User's Manual

Configuration - Configuring OneWireless infrastructure
Wireless Field Interface Part No.: Rev01
2 - 12 User’s Manual
interface, so that the device can rejoin through a different access point for provi-
sioning.
5. Select the required Wireless Field Interface device in the Selection Panel or
the map view and then click Accept on the ribbon bar.
NOTE:
You can select multiple access points using the Selection
Panel or the map view. Use SHIFT+click to select multiple
items in a successive list. Use CTRL+click to select multiple
items not in succession.
It is recommended that you
select and accept only 10 devices at a time.
The Accept Over the Air Devices dialog box appears. The dialog box
displays all the unprovisioned devices that you have selected for enabling
over-the-air provisioning.
NOTE:
To reject a device from joining the network using over-the-
air provisioning method.
Select the required device and click Reject in the ribbon bar. The
Reject Over the Air Devices dialog box displays.
Click Reject.
The Progress column displays the status as In Progress, and then
Completed, when complete.
Click Close.
The Reject Over the Air Devices dialog box closes.
6. Click Accept.
The Progress column displays the status as In Progress, Provi-
sioning, and then Completed, when complete. Do not close the
dialog box when over-the-air provisioning is initiated for devices.
7.
Click Close.
The Accept Over the Air Devices dialog box closes.
All the field devices that you have selected for over-the-air provisioning are
provisioned.
NOTE:
By default, the selected Wireless Field Interface devices
are provisioned and joined as line powered routers. Select
Device Management > Routing Assignment > Routing
Disabled to disable the routing field devices to function as
line powered routers.
2.1.2.1 Removing the provisioning key from Wireless Field Interface gauge
To enable the Wireless Field Interface gauge to join another network,
you must remove the security configuration on the device and then
reprovision the device using over-the-air provisioning.
To remove the provisioning key from Wireless Field Interface gauge
1.
On SmartView, press the UP ARROW and DOWN ARROW simultaneously
(MENU push buttons) to view the menu items on the display.