User's Manual

Configuration - Configuring OneWireless infrastructure
Part No.: Rev01 Wireless Field Interface
User’s Manual 2 - 11
3. Under Over The Air Provisioning, click Enable for 60 Minutes.
The access point functions as a provisioning device for 60 minutes. The
unprovisioned Wireless Field Interface devices that are in the factory default
state start appearing in the Selection Panel. Note that if you do not accept
or reject the devices within 60 minutes, the devices automatically disappear
from the user interface.
4. To filter the Wireless Field Interface device list:
On the ribbon bar, in the Filter group, click Device Status > Un-Provi-
sioned.
The unprovisioned devices appear in the Selection Panel. The extended
Selection Panel enables you to view the available device parameters.
The device establishes a communication link with the access point after it
attains the unprovisioned state. This link persists even if the device is not provi-
sioned using the connected access point. If the device needs to be provisioned
using a different access point, reject the device and then delete it from the user