User's Manual

Configuration - Configuring OneWireless infrastructure
Wireless Field Interface Part No.: Rev01
2 - 10 User’s Manual
NOTE: You can select multiple access points using the Selection
Panel or the map view. Use SHIFT+click to select multiple
items in a successive list. Use CTRL+click to select multiple
items not in succession.
It is recommended that you select
and accept only 10 devices at a time.
The Accept Over the Air Devices dialog box appears. The dialog box
displays all the unprovisioned access points that you have selected for
enabling over-the-air provisioning.
8. Click Accept.
The Progress column displays the status as In Progress, Provi-
sioning, and then Completed when complete. Do not close the
dialog box when over-the-air provisioning is initiated for devices.
9.
Click Close.
The Accept Over the Air Devices dialog box closes.
WARNING!
R220 Wireless Field Interface devices can only be provisioned
using the over-the-air provisioning method.
To provision Wireless Field Interface devices using over-the-air
provisioning method
1.
On the Selection Panel, select the access point.
2. On the Property Panel, expand Device Management.