User's Manual

131211
6a
10
6b
86
8a
8b
531 42
7
3a
3b
9
9a
8c
8d
7a
7b
5a
5b
Appendix
Page 48
Exploded view 973 SmartRadar LT
The printed circuit boards are delivered without EPROM's and on the ICU board, also the NOVRAM is not
installed. These should ordered separately; the part numbers are:
EPROM Part no. EPROM Part no.
ICU - APU L&H (set) 0181.302 ICU_HPI 0181.311
ICU - XPU-2 0181.301 NOVRAM (ICU - XPU-2) 2518.929
RFB-2 / DAB 0181.309
Parts in the 973 SmartRadar LT can be easily exchanged, with the exception of the RFB-2 / DAB board.
That is because of the calibration of the VCO part and the quartz microwave feed through in the SmartRadar
LT housing.
Antennas can be changed for the same type and with the same stem length. Refer to table on next page for
the part numbers. Also the tank separator can be changed for the same type.
Tank separator Part no.
for all planar antenna models 0873.880
O - ring for 0873.880 (for enclosure against flange / adapter plate) 2132.817
O - ring for 0873.880 (for enclosure of antenna stem) 2132.334
for H04 antenna 0873.881
for H02 and D02 antenna’s integrated in antenna