User's Manual

Appendix
Instruction manual 973 SmartRadar LT Page 47
Appendix A Article and part numbers
It is recommended to keep one set printed circuit boards on stock for spare.
Refer to the figure on the next page.
No. Description Part. no.
1 Front cover 0186.853
2 O - ring (215 x 4 NBR70) 2132.990
3 Communication board (option)
3 Allen head screw M3 x 8 st.st. (4 x) 6409.033
a
3 Spring washer M3 st.st. (4 x) 6487.003
b
ICU_RS232/485 board (RS-232c or RS-485) 0973.611
ICU_HPO board (analog 4-20 mA + HART ) 0973.612
®
4 Fuses (2 x)
(ac supply: 1.6 A, 250 V) 2655.177
(dc supply: 2.0 A, 250 V) 2655.178
5 ICU_GPS board (supply: 110 - 240 Vac) 0973.630
5 Allen head screw M3 x 12 st.st. (4 x) 6409.035
a
5 Spring washer M3 st.st. (4 x) 6487.003
b
(supply: 24 - 64 Vdc) 0973.631
6 ICU_IS board (option) 0973.550
6 Allen head screw M3 x 8 st.st. (2 x) 6409.033
a
6 Spring washer M3 st.st. (2 x) 6487.003
b
7 HART (and spot) input board (option)
7 Allen head screw M3 x 8 st.st. (4 x) 6409.033
a
7 Spring washer M3 st.st. (4 x) 6487.003
b
®
(HART ) 0973.623
®
(HART + Spot) 0973.624
®
8 ICU board (basic version) 0973.601
8 Allen head screw M4 x 16 st.st. (4 x) 6409.055
a
8 Spring washer M4 st.st. (4 x) 6487.004
b
8 Allen head screw M4 x 8 st.st. (3 x) 6409.052
c
8 Spring washer M4 st.st. (3 x) 6487.004
d
(with alarm relay) 0973.603
9 Infra-Red connector 0854.380
9 O - ring 2132.210
a
(option)
(part of IR connector
assembly)
10 Terminals (grey) (8 x) 2635.308
11 Terminals (blue) (9 x) 2635.309
12 O - ring (160 x 4 NBR70) 2132.989
13 Rear cover 0186.854
Grease, anti seize 4000.015