User's Manual

Commissioning
Page 36
3.5 Data items
The table below lists a number of data items. They contain measured data, verification data and error data.
The verification data can be used to check the peak selection result. The radar status indicates the validity
of the measured data.
The error data provide low level error information about the instrument (refer to section 4.5).
Item Description
RD
RI
RU
Measured data Product reflection signal strength (dB)
Innage (format according to item
LD
);
the value is preceded by two characters from radar status item
QR
Ullage (format according to item
LD
);
the value is preceded by two characters from radar status item
QR
5C
5D
5E
RT
QR
Verification data Number of detected peaks
Position of detected peaks
(format according to item
LD
; indexed item, 15 elements)
Amplitude of detected peaks
(standard power format; indexed item, 15 elements)
Internal temperature of 973 SmartRadar LT
(format according to item
TD
)
Radar status; refer to section 4.5.2
EB
EE
EP
WC
Error data Error DAB request
Error ICU (APU part) request (indexed item, 10 elements)
Error ICU (XPU-2 part) request
Warning code ICU (APU part) (indexed item, 10 elements)