User's Manual

Safety
Installation guide 970 SmartRadar ATi Page 5
Warning
In hazardous areas it is compulsory to use personal protection and safety gear such as:
hard hat, fire-resistive overall, safety shoes, safety glasses and working gloves.
Avoid possible generation of static electricity.
Use non-sparking tools and explosion-proof testers.
Make sure no dangerous quantities of combustible gas mixtures
are present in the working area.
Never start working before the work permit has been signed by all parties.
Pay attention to the kind of product in the tank. If any danger for health,
wear a gas mask and take all necessary precautions.
Personal safety
The technician must have basic technical skills to be able to safely install the equipment.
When the 970 SmartRadar ATi is installed in a hazardous area, the technician must work in
accordance with the (local) requirements for electrical equipment in hazardous areas.
Safety conventions
“Warnings”, “Cautions” and “Notes” are used throughout this installation guide to bring special
matters to the immediate attention of the reader.
•A Warning concerns danger to the safety of the technician or user;
•A Caution draws the attention to an action which may damage the equipment;
•A Note points out a statement deserving more emphasis than the general text, but not
requiring a “Warning” or a “Caution”.