User's Manual

Vertex SF System
11
User Manual
Introduction
Learn what you need to know about the Honeywell Vertex® SF Continuous Monitor System before
operating.
System Overview
The Honeywell Analytics Vertex SF™ System continuously monitors for toxic gases. It responds to
gases that exceed programmed levels by:
⚫ Triggering alarms and opening event windows to warn operators of high or low concentrations
⚫ Triggering relays to external devices
⚫ Displaying the location, gas type and gas concentration
⚫ Storing the alarm information in a database
The Vertex SF System provides fast response to a wide range of gases. Each location may be up to
400 ft (122 m) from the Vertex SF System. The system uses one or more of Honeywell Analytics’
Chemcassette® analyzers, with or without pyrolyzer, to provide a monitoring system tailored to
meet the requirements of the facility.
The Vertex SF System incorporates a range of redundant and protective features for maximum
uptime:
⚫ Intelligent analyzer modules allow one to stop monitoring with no effect on the remaining
modules
⚫ Power supplies are redundant
⚫ The system powers up in the same state as when powered down
⚫ Filters, Chemcassettes® and major components in one of the analyzers can be replaced while
the remaining analyzers continue to function.
Operation can be through an LCD touch screen or through a local area network (LAN).
Chemcassette® is a registered trademark of Honeywell Analytics, Inc.