Instructions

PARTS CHECKLIST

Kit #46-46128 Contains:

a. Stand

(PN 36-00454)

Qty. 1

b. Screw, MS3 x 6 mm

(PN 18-18670)

Qty. 2

c. Washer, #5 x .5 OD

(PN 18-18671)

Qty. 2

d. Stand Anchor

(PN 50-50449)

Qty. 1

e. M3 x 20 mm Set Screw

(PN 18-18672)

Qty. 1

f. Apron

(PN 50-50440)

Qty. 1

Figure 9.

Special Purchase Kit #46-46351 Contains:

a. Wood Screw, #8 Round Head

(PN 18-18057)

Qty. 4

b. Base

(PN 36-36080)

Qty. 1

Figure10.

DRILL TEMPLATE

Honeywell Scanning & Mobility

9680 Old Bailes Road

Fort Mill, SC 29707

www.honeywellaidc.com

00-02497 Rev B

December 2009

MS9500

Voyager

Series

Stand Installation Guide

Page 4 Page 5

PAGE 1
PARTS CHECKLIST DRILL TEMPLATE Kit #46-46128 Contains: a. b. c. d. e. f. Stand (PN 36-00454) Screw, MS3 x 6 mm (PN 18-18670) Washer, #5 x .5 OD (PN 18-18671) Stand Anchor (PN 50-50449) M3 x 20 mm Set Screw (PN 18-18672) Apron (PN 50-50440) Qty. 1 Qty. 2 Qty. 2 Qty. 1 Qty. 1 MS9500 Qty. 1 Voyager® Series Stand Installation Guide Figure 9. Special Purchase Kit #46-46351 Contains: a. b. Wood Screw, #8 Round Head (PN 18-18057) Base (PN 36-36080) Qty. 4 Qty.
PAGE 2
FREE – STANDING INSTALLATION HARD MOUNT INSTALLATION For Kit #46-46128: HARD MOUNT INSTALLATION Step 4 Remove the logo plate on the stand by gently using an exacto knife to release the plate hook. Step 1 Slide the apron (PN 50-50440) over the stand (PN 36-00454). Figure 5. Step 5 Position the stand over the anchor/base assembly. Figure 1. Step 2 Position the stand so it sits under the tab on the apron.