Instructions

52 Xenon XP User Guide
Interval Between Flashes
Set the length of time, in seconds, between the LED flashes for a low power alert. To
set the interval, scan the barcode below and then scan a digit (1-9) barcode from
the Programming Chart, beginning on page 311, then Save. Default = 2 seconds
between flashes.
Low Power Alert Repeat
Set how many times you want the low power flash pattern (flashes and intervals) to
repeat. To set the number, scan the barcode below and then scan a digit (1-5)
barcode from the Programming Chart, beginning on page 311, then Save. Default
= 1.
Interval Between Alerts
If you have set the Low Power Alert Repeat (page 52) to more than 1, you can set
the length of time, in seconds, between the low power alerts. To set this interval,
scan the barcode below and then scan a digit (10-120) barcode from the
Programming Chart, beginning on page 311, then Save. Default = 10 seconds
between alerts.
Low Power Alert Beep
If you do not want the beeper to sound for a low power alert, scan the Low Power
Alert Beep Off barcode. Any low power alert settings will still flash the scanner
LEDs, whether or not the beeper sounds. Default = Low Power Alert Beep On.
Interval Between Flashes
Low Power Alert Repeat
Interval Between Alerts
Low Power Alert Beep Off