Instructions / Assembly

Notice:
1.50% Tighten before fixing all screws, Allen wrench is recommended instead of an
electric drill.
2
.
Place the item on a flat ground to adjust and make sure it remains stable.
3
.
Tightern up all screws with tools gradually.
4. If the screws are not aligned with holes during assembly, please loosen all the other
screws
to 50% and continue the assembly process.
5
.
If the item is not stable, please loosen all the screws, adjust it on a flat ground an
d
tighten
up all screws again.
6
. Note: If one or some screws are fully tightened during assembly, chances are the
others
will not be aligned with holes. In addition, all the holes are designed t
o be
relatively
larger to provide more space for the adjustment of the screws.
03