Before You Start Read each step carefully before starting. It is very important to ensure each step followed in correct order, otherwise assembly difficulties may occur. Most of board parts are labeled or stamped on the raw edges. Have a check to make sure all parts are included. Work in a spacious area, preferably on a carpet close to where the unit will be used. Keep the handtools close at hand. Do not use power tools to assemble your furniture. They may scratch or damage the parts.
Notice: 1.50% Tighten before fixing all screws, Allen wrench is recommended instead of an electric drill. 2. Place the item on a flat ground to adjust and make sure it remains stable. 3. Tightern up all screws with tools gradually. 4. If the screws are not aligned with holes during assembly, please loosen all the other screws to 50% and continue the assembly process. 5. If the item is not stable, please loosen all the screws, adjust it on a flat ground and tighten up all screws again. 6.
A B Chair Feet Frame (4pcs) D Part list C Chair Seat Frame (2pcs) Mid Chair Frame (4pcs) E Table Top Frame (1pc) G F Bottom Frame (2pcs) Table Left Frame F (1pc) H Right Front Frame (1pc) I Left Front Frame (1pc) Table Right Frame I (1pc) Hardware 1 Bolt M6x40 (24pcs) 2 3 Bolt M6x15 (16pcs) 4 Table Glass (1pc) 04 Seat Gushion (2pcs) 5 Allen key (1pc)
STEP 1 Connect Chair Feet Frame (A) & Middle Chair Frame (C) with Bolt (2) STEP 2 Connect part from STEP 1 & Chair Feet Frame (A) with Bolt (2) 05
STEP 3 STEP 4 Connect part from STEP 2 & Chair Seat Frame (B) with Bolt (1) Put on Cushion (4) to complete chair.
STEP 7 STEP 8 STEP 9 STEP 10 Connect part from STEP 6 & Bottom Frame (E) with Bolt (1) Connect part from STEP 7 & Table Right Frame I (I) with Bolt (1) Connect part from STEP 8 & Table Top Frame (D) with Bolt (1) Put on Table Glass (3) to complete the Table 07
Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing. Check bolts/screws periodically and tighten them if necessary.
