Instructions / Assembly

Hardware inside

Before You Start

Read each step carefully before starting. It is very important to ensure each step followed in

correct order, otherwise assembly difficulties may occur.

Most of board parts are labeled or stamped on the raw edges. Have a check to make sure all

parts are included.

Work in a spacious area, preferably on a carpet close to where the unit will be used.

Keep the handtools close at hand. Do not use power tools to assemble your furniture.

They may scratch or damage the parts.

Component List

Right-leg frame

x2 pcs

Left-leg frame

x2 pcs

Backrest

x2 pcs

Seat

x2 pcs

Table shelf

x1 pc

Wooden leg

x8 pcs

Armrest

x4 pcs

Seat Cushion

x2 pcs

Pillow

x2 pcs

Table top

x1 pc

Table leg

x4 pcs

PAGE 1
Component List Backrest 1 x2 pcs Left-leg frame 2 x2 pcs Right-leg frame 3 x2 pcs Wooden leg 4 x8 pcs Table shelf 5 x1 pc Seat 6 x2 pcs Armrest 7 x4 pcs Pillow 8 x2 pcs Seat Cushion 9 x2 pcs Before You Start Read each step carefully before starting. It is very important to ensure each step followed in correct order, otherwise assembly difficulties may occur. Most of board parts are labeled or stamped on the raw edges. Have a check to make sure all parts are included.
PAGE 2
A M6x25 Bolt x8pcs B M6x35 Bolt x16pcs D M4x15 Screw x16pcs E M4x20 Screw x8pcs G Allen key x2pcs 04 C F M6x55 Bolt x4pcs M6x30 Screw x8pcs 05
PAGE 3
06 07
PAGE 4
08 09
PAGE 5
Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing. Check bolts/screws periodically and tighten them if necessary.