Manualshelf

Instructions / Assembly

ManualsBrandsHoney-Can-Do ManualsGarage Shelves & Racks3-Shelf 14 in. W x 30 in. H x 15 in. D Steel Shelving Unit
12345678
ASSEMBLY
1. The shelves (A) are held on with pairs of the shelf support clips (D).
Align two halves of the shelf support clips (D) on the support pole
at the desired height of the bottom shelf. ***When clips are together
the form a slight cone shape. The top of the clips is the thin end.***
2. The shelf support clip (D) is in the proper place when the raised ridge
on the inside of the clip locks into the ridge on the support pole.
3. Repeat for all 4 support poles so all clips are at the same height. THE
BOTTOM SHELF MUST GO ON FIRST, THEN WORK YOUR WAY UP.
1.
2.
D
D
4
Raised ridge on
inside of clip