GAR-01123 chrome heavy-duty garment rack 68 in H x 35 in W x 18.25 in D (173 cm H x 89 cm W x 46.5 cm D) www.honeycando.com | sales@honeycando.com | 877.2.I.CAN.DO (877.242.
IMPORTANT! Plead read prior to use. This Honey-Can-Do chrome double-flared adjustable height rack is designed for indoor use. Please do not over-load. To prevent tipping, we recommend that you evenly distribute the weight throughout the unit. Please keep top hanger bar horizontal when in use. Please do not use storage closet for anything other than its intended use. Please do not allow children, spouses or pets to hang from or hide in storage closet.
Parts List Part/Illustration (QTY) Description (2) scissors bar (2) base bar (2) bottom upright (2) top upright (2) hanger bar (2) insert bar (2) caster (2) locking caster (16) (4) base cap (4) base cap (4) upright bar cap (1) hangbar cap O (1)hangbar cap P wrench Q hex key tool Thank you for purchasing a Honey-Can-Do Storage Closet! Please follow these step by step instructions carefully. Plan to spend about 35 minutes assembling your new closet.
assembly Step 1 (Lower frame) hanger bars (E) & (H) are placed into the bottom hole Tool Needed: hex key 1. Insert the larger end of 2 tapered support bars (F) into a side support (A). 2. Insert the smaller end of those same tapered support bars (F) into a middle support (B). 3. Insert 2 support bars (G) into the other side of the middle support (B). 4. Place another side support (A) onto the ends of the 2 support bars (G).
assembly Step 2 Tool Needed: hex key 1. I nsert the larger end of 2 tapered support bars (F) into a side support (A). 2. Insert the smaller end of those same tapered support bars (F) into a middle support (B). 3. Insert 2 support bars (G) into the other side of the middle support (B). 4. Place another side support (A) onto the ends of the 2 support bars (G). 5. Insert all 6 lower uprights (C) into the tops of the side and middle supports (A & B). honeycando.
assembly Step 3 1 (Lower frame) 1. I nsert the larger end of 2 tapered support bars (F) into a side support (A). 2. Insert the smaller end of those same tapered support bars (F) into a middle support (B).
assembly Step 4 1 (Lower (Hanging frame) Bar) hanger bars (E) & (H) are placed into the bottom hole hanger bars (E) & (H) are placed into the bottom hole Tool Needed: hex key I nsert the larger end of 2 tapered support bars (F)into a side support (A). Insert the smaller end of those same tapered support bars (F) into a middle support (B). honeycando.
assembly final Step! (casters) hex key I nsert the larger end of 2 tapered support bars (F)into a side support (A). Insert the smaller end of those same tapered support bars (F) into a middle support (B).
assembly storage honeycando.
assembly 10 Honey-Can-Do
For questions or comments, please call 708.240.8100 or visit us online www.honeycando.com LIMITED LIFETIME WARRANTY This product is warranted to be free of defects in material and workmanship for as long as the consumer owns the product. At Honey-Can-Do’s option, defective product will be repaired, replaced or substituted with a product of equal value. For warranty service, e-mail Honey-Can-Do at warranties@honeycando.com or call at (877) 242-2636 (Business Hours: 8a.m. to 4p.m. CST).
your source for organization, storage & style Honey-Can-Do International 5750 McDermott Drive, Berkeley, IL 60163 USA 877.242.2636 | www.honeycando.
