Instructions / Assembly

56
TECHNICAL INFORMATION
Specifications
WT20X
Dimensions and weight
Engine design and performance
Tu n e u p
Pump
Length 24.4 in (620 mm)
Width 18.1 in (460 mm)
Height 18.3 in (465 mm)
Dry mass [weight] 104 lbs (47 kg)
Model GX160T2
Engine type 4-stroke, overhead valve, single cylinder
Displacement
[bore×stroke]
9.9 cu-in (163 cm
3
)
[2.68×1.77 in (68.0×45.0 mm)]
Fuel tank capacity 0.82 US gal (3.1 L)
Engine oil capacity 19 oz (0.58 L)
Cooling system
Forced air
Ignition system Transistor magneto
PTO shaft rotation Counterclockwise
Spark plug gap
0.028 – 0.031 in
(0.7
– 0.8 mm)
See page 36.
Idle speed
1,400 rpm
See shop manual.
Valve clearance (cold) Intake:
0.08±0.02 mm
Exhaust: 0.10±0.02 mm
Other specifications No other adjustments needed.
Suction port diameter 2.0 in (50 mm)
Discharge port diameter 2.0 in (50 mm)
Maximum total head lift Minimum 85 ft (26 m)
Maximum suction head lift Minimum 26 ft (8 m)
Maximum discharge capacity Minimum 184.9 US gal (700 L)/min
Priming time
Maximum 60 seconds/14.8 ft (4.5 m)
Allowable continuous
operating time
Approximately 1.5 hours
(actual time varies with pump load)
+200
- 150
31YG0611-02.fm 56 ページ ２０１４年５月２０日 火曜日 午後５時５４分