Instructions / Assembly

50
TAKING CARE OF UNEXPECTED PROBLEMS
PUMP
No Pump Output
Low Pump Output
Possible Cause Correction
Pump not primed. Prime pump (p. 18)
Hose collapsed, cut or punctured. Replace suction hose (p. 16).
Strainer not completely underwater. Sink the strainer and the end of the
suction hose completely underwater.
Air leak at connector. Replace sealing washer if missing or
damaged. Tighten hose connector and
clamp (p. 16).
Strainer clogged. Clean debris from strainer.
Excessive head. Relocate pump and/or hoses to reduce
head (p. 15).
Engine speed to slow. Move throttle to fast.
Possible Cause Correction
Hose collapsed, damaged, too long, or
diameter too small.
Replace suction hose (p. 16).
Air leak at connector. Replace sealing washer if missing or
damaged. Tighten hose connector and
clamp (p. 16).
Strainer clogged. Clean debris from strainer.
Hose damaged, too long, or diameter too
small.
Replace discharge hose (p. 17).
Marginal head. Relocate pump and/or hoses to reduce
head (p. 15).
Engine speed to slow. Move throttle to fast.
31YG0610.book Page 50 Monday, March 24, 2014 8:39 AM