Instructions / Assembly

46
STORAGE
4. After all fuel has drained into the container, tighten the carburetor
drain bolt securely.
5. Reinstall a new O-ring and sediment cup.
6. Move the fuel valve lever to the OFF position.
Engine Oil
Change the engine oil (see page 30).
Engine Cylinder
1. Remove the spark plug (see page 36).
2. Pour a teaspoon (5 cc) of clean engine oil into the cylinder.
3. Pull the starter grip several times to distribute the oil in the cylinder.
4. Reinstall the spark plug.
5. Pull the starter grip slowly until resistance is felt and the notch on
the st
arter pulley aligns with the hole at th
e top of the recoil starter
cover. This will close the valves so moisture cannot enter the engine
cylinder. Return the starter grip gently.
Align notch on pulley with
hole at the top of cover.
31YG0611-02.fm 46 ページ ２０１４年５月２９日 木曜日 午後４時１９分