Instructions / Assembly

41
SERVICING YOUR PUMP
Installation:
1.Install the O-ring on the pump cover, taking care not to damage the
O-ring.
2.Install the pump cover on the pump casing, and tighten the knobs
hand tight. Then, set the wrench to the knobs and finish tightening
the knobs evenly.
3.Install the drain plug in the pump cover.
4.After tightening the pump cover knobs, check the pump cover and
pump casing to ensure that there is no water leakage.
WRENCH
KNOBS (4)
VOLUTE CASE
O-RING
DRAIN PLUG
PUMP COVER
PUMP CASING
31YG0610.book Page 41 Monday, March 24, 2014 8:39 AM