Instructions / Assembly

39
SERVICING YOUR PUMP
WT30X and WT40X
3.Use a brush to remove carbon deposits from the spark arrester
screen. Be careful to avoid damaging the screen.
The spark arrester must be free of breaks and holes. Replace the
spark arrester if it is damaged.
4.Install the spark arrester, muffler protector, and muffler in the
reverse order of disassembly.
MUFFLER PROTECTOR
4 mm SCREW
5 mm SCREW (4)
SPARK ARRESTER
4 mm
SCREW (2)
WT40X type
uses two 4 mm
screws.
SPARK ARRESTER
5 mm SCREW (2)
MUFFLER
SPARK ARRESTER SCREEN
31YG0610.book Page 39 Monday, March 24, 2014 8:39 AM