Manual
Table Of Contents
- COVER
- INTRODUCTION
- A FEW WORDS ABOUT SAFETY
- CONTENTS
- OUTBOARD MOTOR SAFETY
- CONTROLS AND FEATURES
- BEFORE OPERATION
- OPERATION
- SERVICING YOUR OUTBOARD MOTOR
- THE IMPORTANCE OF MAINTENANCE
- MAINTENANCE SAFETY
- TOOL KIT AND OWNER'S MANUAL
- EMERGENCY STARTER ROPE
- MAINTENANCE SCHEDULE
- TRIM TAB ADJUSTMENT
- MANUAL RELIEF VALVE
- ENGINE COVER REMOVAL AND INSTALLATION
- REFUELING
- FUEL RECOMMENDATIONS
- WATER SEPARATOR INSPECTION AND SERVICE
- FUEL FILTER INSPECTION AND REPLACEMENT
- PORTABLE FUEL TANK AND TANK FILTER CLEANING
- ANODE REPLACEMENT
- PROPELLER REPLACEMENT
- STORAGE
- TRANSPORTING
- TAKING CARE OF UNEXPECTED PROBLEMS
- TECHNICAL AND CONSUMER INFORMATION
- INDEX
97
SERVICING YOUR OUTBOARD MOTOR
SUSPENSION STRAP
WATER
SEPARATOR
FUEL HOSES
WATER
SEPARATOR
WATER
SEPARATOR
BRACKET
HARNESS
CLIP
CLIP C
WATER LEVEL SENSOR
2P CONNECTOR
HOSE CLIPS
(commercially available)
Pinch the fuel hoses with hose
clips to prevent fuel leakage.
Remove the suspension strap from
the water separator bracket; then
remove the strap from the
separator assembly.
During removal of the separator
assembly, take care not to damage
the wire harness with the separator
bracket.
Disconnect the fuel hoses from the
water separator.
Open the harness clip and remove
the harness from clip C; then
disconnect the water level sensor
2P connector.
3. 4. 5.
6.
08/08/04 18:53:16 31ZY9600_098