Manual

84
MANUAL RELIEF VALVE ENGINE COVER REMOVAL
AND INSTALLATION
SERVICING YOUR OUTBOARD MOTOR
MANUAL RELIEF VALVE
ENGINE
COVER
LATCHES
(front/rear)
UNLATCH
FIX
PPOOWWEERR
((TToo ffiixx))
MMAANNUUAALL
((TToo rreelleeaassee))
The engine cover latches fasten the
engine cover to the outboard motor.
To remove the engine cover, unlatch
both front and rear latches, then lift
the engine cover off the outboard
motor.
To install the engine cover, place the
cover on the outboard motor, then
latch both front and rear latches
securely.
For manual tilting, use a screwdriver
to turn the valve counterclockwise 1
or 2 turns. Close the valve firmly
after positioning the outboard motor.
The outboard motor can be tilted
manually after opening the manual
relief valve. This feature enables the
outboard motor to be tilted up or
down when no battery is connected.
Be sure the valve is closed before
operating the outboard motor. If the
valve is not closed, the outboard
motor will tilt up when operated in
reverse.
08/08/04 18:51:14 31ZY9600_085