Manual

−
−
64
OPERATION
KNOT
EMERGENCY
STARTER ROPE
ALTERNATOR PULLEY
TAKING CARE OF
UNEXPECTED PROBLEMS
Pull the emergency starter rope
slowly until resistance is felt, then
pull briskly.
Keep away from moving parts
while pulling the rope.
If necessary, rewind the rope and
pull again. If the engine does not
start after several attempts, refer to
from p. .
Set the controls the same as for
normal starting (see pages
,,).Usethefast
idle control if needed.
Turn the ignition switch key to the
ON position.
Set the alternator pulley so the
cutouts are on the right and left
sides of the alternator pulley as
shown. Hook the knot at the end of
the starter rope (accessory) against
a cutout in the alternator pulley,
and wind the starter rope one and
half turns clockwise along the
groove in the alternator pulley.
6.
7.
8.
112
52
53 55 56 58
08/08/04 18:48:16 31ZY9600_065