Manual
Table Of Contents
- COVER
- INTRODUCTION
- A FEW WORDS ABOUT SAFETY
- CONTENTS
- OUTBOARD MOTOR SAFETY
- CONTROLS AND FEATURES
- BEFORE OPERATION
- OPERATION
- SERVICING YOUR OUTBOARD MOTOR
- THE IMPORTANCE OF MAINTENANCE
- MAINTENANCE SAFETY
- TOOL KIT AND OWNER'S MANUAL
- EMERGENCY STARTER ROPE
- MAINTENANCE SCHEDULE
- TRIM TAB ADJUSTMENT
- MANUAL RELIEF VALVE
- ENGINE COVER REMOVAL AND INSTALLATION
- REFUELING
- FUEL RECOMMENDATIONS
- WATER SEPARATOR INSPECTION AND SERVICE
- FUEL FILTER INSPECTION AND REPLACEMENT
- PORTABLE FUEL TANK AND TANK FILTER CLEANING
- ANODE REPLACEMENT
- PROPELLER REPLACEMENT
- STORAGE
- TRANSPORTING
- TAKING CARE OF UNEXPECTED PROBLEMS
- TECHNICAL AND CONSUMER INFORMATION
- INDEX
50
FUEL HOSE CONNECTIONS
OPERATION
FUEL HOSE CONNECTOR
HOSE PLUG
FUEL
HOSE
HOSE
CLAMP
FUEL HOSE
JOINT
FUEL HOSE
ASSEMBLY
FUEL HOSE
(motor side)
BARB
ARROW
PRIMING
BULB
(outboard motor side)
(fuel tank side)
HOSE CLAMP
(stainless steel)
Connect the fuel hose to the tank,
as shown. Be sure the connectors
snap securely into place.
Remove the hose plug from the
motor side fuel hose. Insert the
fuel hose joint into the motor side
fuel hose and secure it with the
hose clamp. Make sure the arrow
mark on the priming bulb points
toward the motor side.
Store the hose plug in a secure
place.
2.
1.
08/08/04 18:46:18 31ZY9600_051