Manual
Table Of Contents
- COVER
- INTRODUCTION
- A FEW WORDS ABOUT SAFETY
- CONTENTS
- OUTBOARD MOTOR SAFETY
- CONTROLS AND FEATURES
- BEFORE OPERATION
- OPERATION
- SERVICING YOUR OUTBOARD MOTOR
- THE IMPORTANCE OF MAINTENANCE
- MAINTENANCE SAFETY
- TOOL KIT AND OWNER'S MANUAL
- EMERGENCY STARTER ROPE
- MAINTENANCE SCHEDULE
- TRIM TAB ADJUSTMENT
- MANUAL RELIEF VALVE
- ENGINE COVER REMOVAL AND INSTALLATION
- REFUELING
- FUEL RECOMMENDATIONS
- WATER SEPARATOR INSPECTION AND SERVICE
- FUEL FILTER INSPECTION AND REPLACEMENT
- PORTABLE FUEL TANK AND TANK FILTER CLEANING
- ANODE REPLACEMENT
- PROPELLER REPLACEMENT
- STORAGE
- TRANSPORTING
- TAKING CARE OF UNEXPECTED PROBLEMS
- TECHNICAL AND CONSUMER INFORMATION
- INDEX
70A
119
OIL PRESSURE INDICATOR
GOES OFF AND ENGINE
SPEED IS LIMITED
Side-Mount Type
Panel-Mount/Top-Mount Types
TAKING CARE OF UNEXPECTED PROBLEMS
BUZZER
BUZZER
(GREEN)
(GREEN)
(GREEN)
(internal buzzer)
LHT Type (tiller handle)
LRTandXRTTypes
(remote control)
Install a new fuse with the ‘‘70A’’
mark downward.
ACG FUSE RATING:
After finishing replacement, install
the fuse case lid with its hook
toward the engine side.
Be sure the fuse case lid is
securely locked.
Reinstall the electrical parts cover
and engine cover.
Reconnect the battery.
A spare fuse is located on the reverse
side of the fuse case lid and tightened
with two 3 mm screws.
When the new fuse is set as a spare
fuse on the reverse side of the fuse
case lid, set the fuse so that you can
see the ‘‘70A’’ mark on it.
6.
7.
8.
9.
10.
08/08/04 18:56:52 31ZY9600_120