Manual
Table Of Contents
- COVER
- INTRODUCTION
- A FEW WORDS ABOUT SAFETY
- CONTENTS
- OUTBOARD MOTOR SAFETY
- CONTROLS AND FEATURES
- BEFORE OPERATION
- OPERATION
- SERVICING YOUR OUTBOARD MOTOR
- THE IMPORTANCE OF MAINTENANCE
- MAINTENANCE SAFETY
- TOOL KIT AND OWNER'S MANUAL
- EMERGENCY STARTER ROPE
- MAINTENANCE SCHEDULE
- TRIM TAB ADJUSTMENT
- MANUAL RELIEF VALVE
- ENGINE COVER REMOVAL AND INSTALLATION
- REFUELING
- FUEL RECOMMENDATIONS
- WATER SEPARATOR INSPECTION AND SERVICE
- FUEL FILTER INSPECTION AND REPLACEMENT
- PORTABLE FUEL TANK AND TANK FILTER CLEANING
- ANODE REPLACEMENT
- PROPELLER REPLACEMENT
- STORAGE
- TRANSPORTING
- TAKING CARE OF UNEXPECTED PROBLEMS
- TECHNICAL AND CONSUMER INFORMATION
- INDEX
116
TAKING CARE OF UNEXPECTED PROBLEMS
HARD STARTING OR STALLS
AFTER STARTING
(continued)
Take outboard motor to an
authorized Honda Marine dealer,
or refer to the shop manual.
Faulty thermostat or water pump. Replace or repair faulty
components as necessary.
Check water intake screens. Water intake screens clogged. Clean water intake screens.
ENGINE OVERHEATS Possible Cause Correction
Replace or repair faulty
components as necessary.
Take outboard motor to an
authorized Honda Marine dealer,
or refer to the shop manual.
Spark plugs faulty, fouled or
improperly gapped.
Remove and inspect spark plugs.
Possible Cause Correction
Fuel system malfunction, fuel
pump failure, ignition malfunction,
etc.
Replace spark plugs (p. ).
2.
3.
4.
1.
89
08/08/04 18:56:17 31ZY9600_117