Manual
Table Of Contents
- COVER
- INTRODUCTION
- A FEW WORDS ABOUT SAFETY
- CONTENTS
- OUTBOARD MOTOR SAFETY
- CONTROLS AND FEATURES
- BEFORE OPERATION
- OPERATION
- SERVICING YOUR OUTBOARD MOTOR
- THE IMPORTANCE OF MAINTENANCE
- MAINTENANCE SAFETY
- TOOL KIT AND OWNER'S MANUAL
- EMERGENCY STARTER ROPE
- MAINTENANCE SCHEDULE
- TRIM TAB ADJUSTMENT
- MANUAL RELIEF VALVE
- ENGINE COVER REMOVAL AND INSTALLATION
- REFUELING
- FUEL RECOMMENDATIONS
- WATER SEPARATOR INSPECTION AND SERVICE
- FUEL FILTER INSPECTION AND REPLACEMENT
- PORTABLE FUEL TANK AND TANK FILTER CLEANING
- ANODE REPLACEMENT
- PROPELLER REPLACEMENT
- STORAGE
- TRANSPORTING
- TAKING CARE OF UNEXPECTED PROBLEMS
- TECHNICAL AND CONSUMER INFORMATION
- INDEX
100
SERVICING YOUR OUTBOARD MOTOR
SUSPENSION STRAP
FUEL FILTER
(inside strainer cup)
FUEL
HOSE
FUEL HOSE
FUEL FILTER
FUEL FILTER
STRAINER
BRACKET
HOSE CLIPS
(commercially available)
Remove the engine cover (see
page ).
Looking through the translucent
strainer cup, check the fuel filter
for water accumulation and
clogging.
Remove the strainer assembly. If it
is difficult to remove the strainer
assembly by yourself, consult an
authorized Honda Marine dealer.
Remove the suspension strap from
the fuel filter bracket, and then
remove the strap from the fuel
filter assembly.
Before removing the fuel filter, to
prevent fuel leakage, place fuel
hose clips on the fuel hoses on
each side of the fuel filter.
Disconnect the fuel hoses from the
fuel filter.
If necessary, replace the fuel filter
with a new one.
3.
2.
1. 4.
5.
84
08/08/04 18:53:44 31ZY9600_101