User guide

Example 1:

If opening a door or the tailgate causes the alarm to be tr

iggered, the Status LED will flash once,

pause and repeat this sequence for 1 minute.

Example 2:

If the alarm is triggered twice, small number is shown first.

First trigger is Glass breakage and

second trigger is Door opening. The Status LED will flash once (door), pause

, flash four times

(glass), pause and repeat this cycle of operation for 1 min

ute.

TRIPPED

STATUS LED

SENSOR

NUMBER OF FLASHES

Door or Tailgate

Ignition Key Switch

Ignition Switch

Battery Disconnected

Glass Breakage

Tripped Sensor Indication

• After disarming the system, if the tripped sensor wa

rning indicator appears, you can

identify which portion of the security system has been tr

ipped by observing the number of

flashes as shown below.

• Information regarding the security system can be retr

ieved from the memory of the

systems main control unit.

Insert the ignition key.

Within 1 second after step 2, open a door or the tailgate.

Tripped Sensor Warning and Indication

Disarm the security system.

Close the door and tailgate.

Within 1 second after step 3, remove the key from the ignition s

witch.

The status LED flashes to indicate which sensor(s) was/w

ere tripped.

4628070B

4625051B

Status

LED