Manual

BEFORE OPERATION

Mulching Plug

To mulch the grass clippings

rather than bag them, install

the mulching plug.

1. Stop the engine.

2. Raise the discharge

guard.

3. Remove the grass bag.

4. Insert the mulching plug

into the discharge chute

at the back of the

mower.

Make sure the tab at the bottom rear of the mulching plug fits

snugly into the slot at the back of the discharge chute.

Cutting Height

To adjust cutting height, pull

each adjustment lever

toward the wheel and move

it into another notch.

Move the adjustment lever

to the same notch on each

wheel.

If you are not sure what

cutting height to select, start

with a high setting and mow

a small area. If necessary,

adjust the cutting height.

SLOT

TAB

ADJUSTMENT LEVERS

3/4 in (19 mm)

1-1/2 in (39 mm)

2 in (51 mm)

2-1/2 in (63 mm)

3 in (76 mm)

4 in (101 mm)

1 in (25 mm)

ADJUSTMEN

T LEVER

3-1/2 in (89 mm)