Use and Care Manual

ASSEMBLY

Wheel Kit Installation

Do not operate the generator without the wheel kit installed. The wheel

kit provides air space between the ground and the generator air intake.

If the wheel kit is not installed, it may be possible for dirt and debris to

be drawn into the generator air intake, possibly causing generator

damage. Always operate the generator with the wheel kit installed.

1. Install the two stands on the under frame using four 8×20 mm

flange bolts.

2. Install the two wheels on the axle using the 20 mm washers and

4.0×28 mm cotter pins. After installing the split pins, bend the pins

to ensure that the wheels are secured to the axle.

3. Install the axle assembly on the generator using four 8×20 mm

flange bolts.

TORQUE: 11–16 lbf·ft (15–22 N·m, 1.5–2.2 kgf·m)

STAND

8×20 mm

FLANGE BOLT (4)

4.0×28 mm

COTTER PIN (2)

AXLE

WHEEL (2)

8×20 mm

FLANGE BOLT (4)

20 mm WASHER (2)

SHORTER

31Z376160.book 97 ページ２０１９年２月８日　金曜日　午後２時２分