Operation Manual

CORDLESS LAWN TRIMMER — HHTE38BE34 EN
EN
Lawn
Trimmer
head will not
extend line.

The motor shaft or Lawn
Trimmer head is bound with
grass.

Stop the Lawn Trimmer, remove
the battery, and remove the
grass from the motor shaft and
Lawn Trimmer head.

There is not enough line on
the spool.

Remove the battery and replace
the cutting line; follow the
section “LINE REPLACEMENT”
in this manual.

The Lawn Trimmer head is
dirty.

Remove the battery and clean
the spool, spool retainer and
spool base.

Line is tangled on spool.

Remove the battery, remove
the line from the spool and
rewind; follow the section
“LINE REPLACEMENT” in this
manual.

The line is too short.

Remove the battery and pull the
lines while alternately pressing
down on and releasing the bump
knob.
Grass wraps
around Lawn
Trimmer
head and
motor
housing.

Cutting tall grass at ground
level.

Cut tall grass from the top down,
removing no more than 20 cm in
each pass to prevent wrapping.
Line is not
cutting well.

The line-cutting blade on the
edge of the guard has become
dull.

Sharpen the line-cutting blade
with a le or replace it with a
new blade.