Operation Manual

CORDLESS LAWN TRIMMER — HHTE38BE
17 EN
EN
MOUNTING AND ADJUSTING THE FRONT-ASSIST HANDLE
WARNING: Always remove battery pack from the product when you are
assembling parts, making adjustments,
cleaning, or when the product is not in
use.
1. Remove the battery pack from the
Lawn Trimmer.
2. Loose the wing nut by hand and
remove the wing nut, lock pole,
clamping block from the handle
(Fig. 4).
3. Align the slot of the front-assist
handle with the shaft, and push the
handle in place, as shown in Fig. 5.
WARNING: Only x the front-assist
handle in front of the soft sleeve on the
shaft.
4. Insert the clamping block into the
slot of the front-assist handle, and
push it in place, as shown in Fig. 6.
5
6
Lock Pole
4
Front-Assist Handle
Clamping
Block
Wing Nut