Replacement Part List
Table Of Contents
- F220
- INTRODUCTION
- CONTENTS
- TILLER SAFETY
- COMPONENT & CONTROL LOCATIONS
- BEFORE OPERATION
- OPERATION
- SERVICING YOUR TILLER
- THE IMPORTANCE OF MAINTENANCE
- MAINTENANCE SAFETY
- MAINTENANCE SCHEDULE
- REFUELING
- FUEL RECOMMENDATIONS
- ENGINE OIL LEVEL CHECK
- ENGINE OIL CHANGE
- ENGINE OIL RECOMMENDATIONS
- TRANSMISSION OIL LEVEL CHECK (USA model)
- AIR FILTER INSPECTION
- AIR FILTER CLEANING
- SPARK PLUG SERVICE
- CLUTCH CABLE ADJUSTMENT
- THROTTLE CABLE ADJUSTMENT
- SPARK ARRESTER SERVICE (optional part)
- STORAGE
- TRANSPORTING
- TAKING CARE OF UNEXPECTED PROBLEMS
- TECHNICAL INFORMATION
- CONSUMER INFORMATION
- QUICK REFERENCE INFORMATION
QUICK REFERENCE INFORMATION
Fuel Type
Regular unleaded gasoline with an
ethanol content of no more than
10% and a pump octane rating of
86 or higher (see page 29)
Engine Oil Type
SAE 10 W – 30, API SJ or later,
for general use (see page 32)
Maximum oil capacity:
10 US oz (0.30 L, 10.6 Imp oz)
Spark Plug Type DENSO: U14FSR – UB
Maintenance
Before each
use, check the
following.
Engine oil
Air filter
Tiller outside
Clutch lever function
Bolt and nut torque
Tines
Cables and wires
Engine operation
First 20 hours
Change engine oil
Clutch cable check and adjust
Subsequent
Refer to maintenance
schedule (see page 27)
31V146410.book 61 ページ ２０１８年３月７日 水曜日 午前９時８分