Replacement Part List
Table Of Contents
- F220
- INTRODUCTION
- CONTENTS
- TILLER SAFETY
- COMPONENT & CONTROL LOCATIONS
- BEFORE OPERATION
- OPERATION
- SERVICING YOUR TILLER
- THE IMPORTANCE OF MAINTENANCE
- MAINTENANCE SAFETY
- MAINTENANCE SCHEDULE
- REFUELING
- FUEL RECOMMENDATIONS
- ENGINE OIL LEVEL CHECK
- ENGINE OIL CHANGE
- ENGINE OIL RECOMMENDATIONS
- TRANSMISSION OIL LEVEL CHECK (USA model)
- AIR FILTER INSPECTION
- AIR FILTER CLEANING
- SPARK PLUG SERVICE
- CLUTCH CABLE ADJUSTMENT
- THROTTLE CABLE ADJUSTMENT
- SPARK ARRESTER SERVICE (optional part)
- STORAGE
- TRANSPORTING
- TAKING CARE OF UNEXPECTED PROBLEMS
- TECHNICAL INFORMATION
- CONSUMER INFORMATION
- QUICK REFERENCE INFORMATION
21
OPERATION
OPERATING THE CONTROLS FOR TILLING
If the tines dig in but the machine will not move forward, move the
handlebars from side to side. When turning, push down on the
handlebars to bring the tiller’s weight to the rear; this will make turning
easier.
Handlebar Height Adjustment
Stop the engine before adjusting
the handlebar height.
To adjust the handlebar height,
loosen the handlebar height
adjuster, select the appropriate
holes, and tighten it.
Clutch
When the clutch lever is
squeezed, the clutch is engaged
and power is transmitted to the
transmission.
When the lever is released, the
clutch is disengaged and power is
not transmitted.
HANDLEBAR
HEIGHT
ADJUSTER
CLUTCH LEVER
31V146410.book 21 ページ ２０１８年３月７日 水曜日 午前９時８分