Replacement Part List
Table Of Contents
- F220
- INTRODUCTION
- CONTENTS
- TILLER SAFETY
- COMPONENT & CONTROL LOCATIONS
- BEFORE OPERATION
- OPERATION
- SERVICING YOUR TILLER
- THE IMPORTANCE OF MAINTENANCE
- MAINTENANCE SAFETY
- MAINTENANCE SCHEDULE
- REFUELING
- FUEL RECOMMENDATIONS
- ENGINE OIL LEVEL CHECK
- ENGINE OIL CHANGE
- ENGINE OIL RECOMMENDATIONS
- TRANSMISSION OIL LEVEL CHECK (USA model)
- AIR FILTER INSPECTION
- AIR FILTER CLEANING
- SPARK PLUG SERVICE
- CLUTCH CABLE ADJUSTMENT
- THROTTLE CABLE ADJUSTMENT
- SPARK ARRESTER SERVICE (optional part)
- STORAGE
- TRANSPORTING
- TAKING CARE OF UNEXPECTED PROBLEMS
- TECHNICAL INFORMATION
- CONSUMER INFORMATION
- QUICK REFERENCE INFORMATION
14
CONTROLS
Starter Grip
Pulling the starter grip operates
the recoil starter to crank the
engine for starting.
Throttle Lever
The throttle lever controls engine
speed.
Moving the throttle lever in the
directions shown makes the
engine run faster or slower.
Tine speed is controlled by
adjusting the throttle lever. At the
maximum throttle position, the
tines will rotate at the highest
speed.
Moving the throttle lever toward
the idle position will decrease the
tine speed.
Handlebar Height Adjuster
Handlebar height can be adjusted
to match operator height.
For adjustment, see page 21.
For normal tilling, the most
comfortable operator position is
with the handlebars at waist
height.
STARTER GRIP
THROTTLE
LEVER
SLOW
FAST
HANDLEBAR
HEIGHT
ADJUSTER
31V146410.book 14 ページ ２０１８年３月７日 水曜日 午前９時８分