Owner's Manual
INSTALLATION OF OPTIONAL PARTS
Remote Control Kit Installation
1. Remove the cap from the 7-pin connector on the generator cover, and
connect the 7-pin connector of the remote control cable.
Be sure to install the cap on the connector when the remote control kit
is not used.
GENERATOR SIDE
2. Connect the other end of the remote control cable to the remote control
switch box 7-pin connector.
7-PIN CONNECTOR
REMOTE CONTROL
SWITCH BOX
l
Do not use excessive force when disconnecting the remote control
cable from the generator or the switch box. the cable could be damaged
causing a malfunction in the remote control kit.
l
Do not allow objects to rest on the cable or allow objects to move over
the cable. The cable could be damaged causing a short circuit.
l
Do not expose the remote control switch box to water.
Water may short circuit the switch box causing it to fail.
57